FRP 14-37

STANDARD SPEC SHEET

FRP 14-37 - HYDRAULIC FORM RIDING PAVER

---

Turbocharged Diesel Engine* -                  

• 235 HP (175.2 kW) Tier IV
• enclosed engine compartment
• engine sound proofing

Hydraulic Oil Reservoir - 161 gallon (609 liter)

Fuel Reservoir - 60 gallon (227 liter)

2 Hydraulic System Heat Exchanger with electric fan

20 Hydraulic Vibrators

• vertical adjustment controlled from operator’s platform
• individual or en-masse vibrator speed controls
• automatic shut-off with machine travel
• maximum flow 4 gallon (15.14 liter) per minute
• normal operating pressure 800 - 1300 psi

24 Hydraulic Vibrator Circuits                   

• with individual variable controls
• pressure compensated

Hydraulic Pump System                

• (3) triple stage hydraulic pumps
• pressure relief manifold for convenient pressure
• adjustments and monitoring

14 ft. - 37 ft. (4.26 m - 11.27 m) Paving Width                  

• by 6-inch (15 cm) increments
• 14 ft. (4.26 m) main frame (minimum width)
• 24-inch (61 cm) structural frame
• frame extensions included in standard width package: (4) 4 ft. (122 cm), (2) 2 ft. (61 cm), (2) 1 ft. (30 cm), (2) 6-inch (15 cm)

Hydraulic Spreader Box Lift                      

• lift controlled at operator’s platform
• machine is less than 8 ft. 6-inch (2.59 m) wide when folded for transport
• single lever control

4 Form Riding Wheels                     

• hydraulically controlled rear form wheels (non-powered)
• wheels are urethane covered for durability
• adjustable front form wheels

Paving Pans              

• bolt-together sections to match frame extensions ¼-inch  x 18-inch x 48-inch (6.35 mm x 45.7 cm x1.22 m)
• pans installed with 6 bolts
• “quick disconnect” mounting
• hydraulic power crown controlled from operator’s console
• curb mold inserts for right and/or left side

Hydraulically Powered Split Tamper Bar System                     

Spreader Auger System

• 16-inch (40.6 cm) diameter, split reversible, heavy duty augers

Hydraulic Strike-Off                       

• hydraulically controlled strike-off plates
• individual controls for variable crown paving

Steering System                  

• 1 hydraulic sensor
• steer from right or left-hand side of machine
• automatic and manual steering, controlled from operator’s platform

Power Wash System                       

• (2) 65 gallon (242 liter) water tanks
• 2500 psi, 4 gallon (15.1 liter) per minute hydraulic power wash pump
• 25 ft. (7.6 m) high pressure hose and wand

Dual Axle Transport System                     

• hydraulically controlled transport axles
• single lever control from operator’s platform
• wheels fold up during paving
• heavy duty towing hitch for travel removes for paving

Emergency Shut-Down System                

• single switch operation
• electronic over hydraulic
• controls all critical functions of machine: travel, tamper, vibration

Operator’s Platform                       

• hydraulic system pressure gauges: travel, vibrator, tamper, auger
• hydraulic controls: travel, vibrator, tamper, pressure wash, strike-off, auger
• high visibility “wrap around” console
• engine controls and monitoring devices mounted on console
• safety railing
• engineered for easy monitoring of all machine functions
• canopy

 *Engine make determined by customer need and availability 

Optional Equipment

(not included in base machine)

Additional Hydraulic Vibrators                                                                          

Curb Molds Built to Customer Specification                                                                

Hydraulic Center Bar Inserters with Electronic Indicator

• for insertion of straight bars into longitudinal joint

Hydraulic Oscillating Rear Belt Finisher with Variable Speed Control         

• 14-inch (35 cm) wide rubber belt
• adjustable winch tensioner

Hydraulic Curb Shut-Off for Curb Molds                                                            

Front Delivery Belt                                                                                                

Power Back-up Wheels                                                                                                     

Water Fogging Bar (for Watering Burlap)

• high pressure
• brass fogging nozzles

Additional 4 Port Vibrator Manifold                                                                              

(when purchased with new machine)                            

• includes all vibrator quick disconnects
• includes 4 individual vibrator speed controls
• includes all hydraulic hoses
• factory installation
• includes additional vibrator pump capacity

 Additional 8 Port Vibrator Manifold                                                                              

(when purchased with new machine)                            

• includes all vibrator quick disconnects
• includes 8 individual vibrator speed controls
• includes all hydraulic hoses
• factory installation
• includes additional vibrator pump capacity

Additional Complete Frame Extension Assemblies                                                   

• 4 ft. (1.2 m) assembly
• includes frame sections, paving pans, tamper, auger, walkway
• does not include vibrators

Critical Spare Parts Package                                                                   

2 Year Filter Package

Material and Specifications subject to change without notification