SFP 12-27
SLIP FORM PAVER
Are you ready to find out how we can help you succeed?
STANDARD SPEC SHEET
SFP 12-27 - SLIP FORM PAVER - 2 TRACK
Turbocharged Diesel Engine* -
- 240 hp (179 kW) Tier IV
- enclosed engine compartment
- engine sound proofing
Hydraulic Oil Reservoir 211 gallon (798 liter)
Fuel Reservoir 116 gallon (440 liter)
2 Hydraulic System Heat Exchangers with electric fan
16 Hydraulic Vibrators
- vertical adjustment controlled from operator’s platform
- individual or en-masse vibrator speed controls
- automatic shut-off with machine travel
- maximum flow 4 gallon (15.14 liter) per minute
- normal operating pressure 800 - 1300 psi
16 Hydraulic Vibrator Circuits with Individual Variable Controls
- pressure compensated
Hydraulic Pump System
- (2) triple stage hydraulic pumps
- double stage hydraulic pump
- one pressure relief manifold for convenient pressure monitoring and pressure adjustments
Two Crawler Tracks
- length: 12 ft. 4-inches (3.76 m)
- width: 12-inches (30 cm)
- 6-inch (15 cm) pitch - triple grouser shoes
- 66:1 gear reduction
- sealed, lifetime lubricated rollers
12 ft. - 27 ft. (3.65 m - 8.2 m) Paving Width
- by 6-inch (15 cm) increments
- 12 ft. (3.65 m) main frame (minimum width)
- additional paving width to 35 ft. (10.67 m) is optional
Paving Pans
- bolt-together sections to allow for paving: 12 ft. - 27 ft. (3.65 m - 8.2 m) by 6-inch (5 cm) increments 3/8-inch thick x 18-inch high x 52-inch long (9 mm thick x 45 cm high x 132 cm long)
- power crown “on-the-go” for uninterrupted paving through transitions and intersections
- tampers and vibrator rack follow vertical movement of pans
- hydraulic power crown controlled from operator’s console
- crown gauge indicator
- curb mold inserts for right and/or left side
- 8-inch (20.3 cm) trailing pan extensions with vertical stabilizers at 1 ft. (30.5 cm) intervals for fine adjustment and rigidity
Hydraulically Powered Split Tamper Bar System
- adjustable tamping depth
- variable speed
- double bar system
Hydraulically Adjustable Side Forms
- 6-way hydraulic adjustment
- split 30-inch (76 cm) high side forms – folding inward for transport
- side forms attach to the main frame of the machine, not tracks
- 18-inch (45 cm) vertical stroke,
- 4-inch (10 cm) horizontal stroke
- adjustable edge slump control
- hydraulically controlled from ground and operator’s platform
Spreader Auger System
- 16-inch (41 cm) diameter, split reversible, heavy duty augers, variable speed planetary drives
- augers are adjustable for height
- augers drives are shielded from wet concrete
- quick disconnect for width changes
Hydraulic Strike-Off
- hydraulically controlled strike-off plates
- individual controls for variable crown paving
Grade Control System
- 4 hydraulic stringline sensors
- automatic and manual control from operator’s platform
- system works with two string lines, or “lock to grade”
Steering System
- 1 hydraulic stringline sensor
- steer from right or left-hand side of machine
- automatic and manual steering, controlled from operator's platform
Power Wash System
- (2) 110 gallon (416 liter) water tanks
- 2000 psi, 4 gallon (15 liter) per minute hydraulic power wash pump
- 25 ft. (7.6 m) high pressure hose and wand
Intermittent Shut-Down System
- single switch operation
- electronic over hydraulic
- controls all critical functions of machine: grade, travel, tamper, vibration, belt finisher
Operator’s Platform
- hydraulic system pressure gauges: grade, travel, vibrator, tamper, auger
- hydraulic controls: travel, vibrator, tamper, pressure wash, strike-off, auger, grade
- high visibility “wrap around” console
- engine controls and monitoring devices mounted on console
- safety railing
- engineered for easy monitoring of all machine functions
- canopy
Transport Dimensions
- width: 12 ft. 4-inches (3.76 m)
- length: paving width plus 4 ft. (1.2 m) (2 ft. (60 cm) each side for track and end frame)
- base machine weight (12 ft. / 3.65 m): 54,000 lbs. (25540 kg)
- full width weight (27 ft. / 8.2 m): 63,000 lbs. (28636 kg)
*Engine make determined by customer need and availability
Optional Equipment
(not included in base machine)
Poly Pads
- molded to steel pads, chemical and structural bond
Four Crawler Tracks (in lieu of 2 tracks)
Additional Complete Frame Extension Assemblies
- 4 ft. (1.2 m) assembly
- includes frame sections, paving pans, tamper, auger, walkway
- does not include vibrators
Additional Hydraulic Vibrators
Curb Molds Built to Customer Specification
Male Side Form Key
- bolt on, removable, machined to customer specs
Hydraulic Center Bar Inserters with Electronic Indicator
- for insertion of straight bars into longitudinal joint
Hydraulic Side Bar Inserter with Electronic Indicator
- for insertion of straight or 90° bars into edge of slab
Automatic Transverse Dowel Bar Inserter
Hydraulic Oscillating Rear Belt Finisher with Variable Speed Control
- 14-inch (35 cm) wide rubber belt
- adjustable winch tensioner
Hydraulic Curb Shut-Off for Curb Molds
Manual Curb Shut-Off for Curb Molds
Belt Conveyor for Unloading Transit Mixer Off-Grade
- 30-inch (76 cm) conveyor wing by 13 ft. (3.9 m) long
- hydraulic variable speed drive
- hydraulic shift, side to side
Sensor for Reverse Steering and Travel
Water Fogging Bar (for Watering Burlap)
- high pressure
- brass fogging nozzles
Additional 4 Port Vibrator Manifold
(When Purchased with New Machine)
- includes all vibrator quick disconnects
- includes 4 individual vibrator speed controls
- includes all hydraulic hoses
- factory installation
- includes additional vibrator pump capacity
Additional 8 Port Vibrator Manifold
(When Purchased with New Machine)
- includes all vibrator quick disconnects
- includes 8 individual vibrator speed controls
- includes all hydraulic hoses
- factory installation
- includes additional vibrator pump capacity
4 Point Outrigger Lift (for lifting the Paver for Truck loading)
- all hydraulic controls
- allows paver to be truck loaded with no side ramp access
Hydraulic Oscillating Auto Float
- variable transverse oscillation speed
- variable fore-aft oscillation speed
- crownable
- 8 ft. (2.43 m) stainless steel float pan
Hydraulic Edge Slump Control (in lieu of manual)
- hydraulic control from ground position
Metal Keyway Former and Punch Assembly
- must specify for left or right side
Critical Spare Parts Package
2 Year Filter Package
Optional Track Lengths and Width
Material and Specifications subject to change without notification