SFP 8-15


Are you ready to find out how we can help you succeed?

Call us TODAY!



Turbocharged Diesel Engine* -                 

  • 140 hp (104.4kW) Tier IV
  • enclosed engine compartment
  • engine sound proofing

Hydraulic Oil Reservoir 164 gallon (624.59 liter)                        

Fuel Reservoir 60 gallon (227.12 liter)                 

1 Hydraulic System Heat Exchangers with electric fan

6 Hydraulic Vibrators                     

  • vertical adjustment controlled from operator platform
  • individual or en-masse vibrator speed controls
  • automatic shut-off with machine travel
  • maximum flow 4 gallon (15.14 liter) per minute
  • normal operating pressure 800 - 1300 psi

8 Hydraulic Vibrator Circuits

  • with individual variable controls pressure compensated

Hydraulic Pump System                

  • (2) quad stage hydraulic pumps
  • pressure relief manifold for convenient
  • pressure monitoring and pressure adjustments

Two Crawler Tracks             

  • length: 12 ft. 4-inch (3.76 m)
  • width: 12-inches (30 cm)
  • 6-inch (30 cm) pitch - triple grouser shoes
  • 49:1 gear reduction
  • sealed, lifetime lubricated rollers

8 ft. - 15 ft. (2.43 m - 4.57 m) Paving Width                     

  • by 6-inch (15 cm) increments
  • 8 ft. (2.43 m) main frame (minimum width)

Paving Pans              

  • bolt-together sections to allow for paving 8 ft. - 15 ft. (2.43 m - 4.57 m) by 6-inch (15 cm) increments
  • 3/8-inch-thick x 18-inch-high x 42-inch long (9 mm thick x 45 cm high x 107 cm long)
  • curb mold inserts for right and/or left side
  • 8-inch (20.3 cm) trailing pan extensions with vertical stabilizers at 1 ft. (30.5 cm) intervals for fine adjustment and rigidity

Hydraulically Powered Split Tamper Bar System                     

  • adjustable tamping depth
  • variable speed
  • double bar system

Hydraulically Adjustable Side Forms                  

  • 6-way hydraulic adjustment
  • split 30-inch (76 cm) high side forms – folding inward for transport
  • side forms attach to the main frame of the machine not tracks
  • 18-inch (45 cm) vertical stroke,
  • 4-inch (10 cm) horizontal stroke
  • adjustable edge slump control
  • hydraulically controlled from ground and operators’ platform
  • 16-inch (41 cm) diameter, split reversible, heavy duty augers, variable speed
  • planetary drives
  • augers are adjustable for height
  • augers drives are shielded from wet concrete
  • quick disconnect for width changes

Hydraulic Strike-Off                       

  • hydraulically controlled strike-off plates
  • individual controls for variable crown paving

Grade Control System                    

  • 4 hydraulic stringline sensors
  • automatic and manual control from operator’s platform
  • system works with two string lines, or “lock to grade”

Steering System                    

  • 1 hydraulic stringline sensor
  • steer from right or left-hand side of machine
  • automatic and manual steering, controlled from operator’s platform

 Power Wash System                       

  • 110 gallon (416 cm) water tanks
  • 2000 psi, 4 gallon (15 liter) per minute hydraulic power wash pump
  • 25 ft (7.6 m) high pressure hose and wand

Intermittent Shut-Down System             

  • single switch operation
  • electronic over hydraulic
  • controls all critical functions of machine: grade, travel, tamper, vibration, belt finisher

Operator’s Platform                       

  • hydraulic system pressure gauges: grade, travel, vibrator, tamper, auger
  • hydraulic controls: travel, vibrator, tamper, pressure wash, strike-off, auger, grade
  • high visibility “wrap around” console
  • engine controls and monitoring devices mounted on console
  • safety railing
  • engineered for easy monitoring of all machine functions
  • canopy

Transport Dimensions                    

  • width: 12 ft. 4-inch (3.76 m)
  • length: paving width plus 4 ft. (121 cm) (2 ft. (60 cm) each side for track and end frame)                        
  • base machine weight - (8 ft. / 2.43 m): 36,600 lbs. (16636 kg)
  • full width weight - (15 ft. / 4.57m): 40,500 lbs. (18409 kg)

*Engine make determined by customer need and availability 


Optional Equipment

(not included in base machine)

Poly Pads                                                                                                                                                                          

  • molded to steel pads, chemical and structural bond

Four Crawler Tracks (in lieu of 2 tracks)                                                                                                                                                       

Additional Complete Frame Extension Assemblies                                                                                                 

  • 4 ft. (1.2 m) assemblies includes frame sections, paving pans, tamper, auger, walkway, does not include vibrators

Additional Hydraulic Vibrators                                                                                                                                    

Curb Molds Built to Customer Specification                                                                                                             

Male Side Form Key

  • bolt on, removable, machined to customer specs

Hydraulic Center Bar Inserters with Electronic Indicator                                                                                      

  • for insertion of straight bars into longitudinal joint

Hydraulic Side Bar Inserter with Electronic Indicator

  • for insertion of straight or 90° bars into edge of slab

Automatic Transverse Dowel Bar Inserter

Hydraulic Oscillating Rear Belt Finisher with variable speed control

  • 14-inch (35 cm) wide rubber belt
  • adjustable winch tensioner

Hydraulic Curb Shut-Off for Curb Molds

Manual Curb Shut-Off for Curb Molds                                                                                                                        

Belt Conveyor for Unloading Transit Mixer Off-Grade                                                                                            

  • 30-inch (76 cm) conveyor wing by 11 ft. (3.35 m) long
  • hydraulic variable speed drive
  • hydraulic shift, side to side

Sensor for Reverse Steering and Travel                                                                                                                     

Water Fogging Bar (for watering burlap)                                                                                                                                                       

  • high pressure
  • brass fogging nozzles


Additional 4 Port Vibrator Manifold                                                                                                                           

(when purchased with new machine)                                         

  • includes all vibrator quick disconnects
  • includes 4 individual vibrator speed controls
  • includes all hydraulic hoses
  • factory installation
  • includes additional vibrator pump capacity


Additional 8 Port Vibrator Manifold                                                                                                                           

(when purchased with new machine)                                         

  • includes all vibrator quick disconnects
  • includes 8 individual vibrator speed controls
  • includes all hydraulic hoses
  • factory installation
  • includes additional vibrator pump capacity

4 Point Outrigger Lift  - for lifting the Paver for Truck loading                                       

  • all hydraulic controls
  • allows paver to be truck loaded with no side ramp access

Hydraulic Oscillating Auto Float                                                                                                                             

  • variable transverse oscillation speed
  • variable fore-aft oscillation speed
  • crownable
  • 8 ft. (2.43 m) stainless steel float pan

Hydraulic Edge Slump Control (in lieu of manual)                                                                                                                             

  • hydraulic control from ground position

Metal Keyway Former and Punch Assembly              

  • must specify for left or right side

Critical Spare Parts Package                                                      

2 Year Filter Package                                                                   

Optional Track Lengths and Width

Material and Specifications subject to change without notification  



Phone: +1 (319) 824-3011

Fax: +1 (319) 824-5013

Email: info@hempaving.com

HEM Paving Equipment
P.O. Box 97 - 601 E First Street
Grundy Center, Iowa 50638 U.S.A.


Pleased to be associated with: