Are you ready to find out how we can help you succeed?
STANDARD SPEC SHEET
FRP 9-18 - HYDRAULIC FORM RIDING PAVER
Turbocharged Diesel Engine* -
- 122 HP (89.7 kW) Tier IV
- enclosed engine compartment
- engine sound proofing
Hydraulic Oil Reservoir - 124 gallon (469 liter)
Fuel Reservoir - 52 gallon (197 liter)
1 Hydraulic System Heat Exchanger with electric fan
8 Hydraulic Vibrators
- vertical adjustment controlled from
- operator platform
- individual or en-masse vibrator speed controls
- automatic shut-off with machine travel
- maximum flow 4 gallon (15.14 liter) per minute
- normal operating pressure 800 - 1300 psi
12 Hydraulic Vibrator Circuits
- with individual variable controls
- pressure compensated
Hydraulic Pump System
- (2) triple stage hydraulic pumps
- pressure relief manifold for convenient pressure adjustments and monitoring
9 ft. - 18 ft. (2.74 m - 5.48 m) Paving Width
- by 6-inch (15 cm) increments
- 9 ft. (2.74 m) main frame (minimum width)
- 24-inch (61 cm) structural frame
- frame extensions included in standard width package: (2) 2 ft. (61 cm), (4) 1 ft. (30 cm), (2) 6-inch (15 cm)
Hydraulic Spreader Box Lift
- lift controlled at operator’s platform
- machine is less than 8 ft. 6-inch (2.59 m) wide when folded for transport
- single lever control
4 Form Riding Wheels
- hydraulically controlled rear form wheels (non-powered)
- wheels are urethane covered for durability
- adjustable front form wheels
Paving Pans
- bolt-together sections to match frame extensions
- ¼-inch x 18-inch x 48-inch
- 35 mm x 45.7 cm x1.22 m
- pans installed with 6 bolts
- “quick disconnect” mounting
- hydraulic power crown controlled from operator’s console
curb mold inserts for right and/or left side
Hydraulically Powered Split Tamper Bar System
Spreader Auger System
- 16-inch (40.6 cm) diameter, split reversible, heavy duty augers
Hydraulic Strike-Off
- hydraulically controlled strike-off plates
- individual controls for variable crown paving
Steering System
- 1 hydraulic sensor
- steer from right or left-hand side of machine
- automatic and manual steering, controlled from operator’s platform
Power Wash System
- (2) 65 gallon (242 liter) water tanks
- 2500 psi, 4 gallon (15.1 liter) per minute hydraulic power wash pump
- 25 ft (7.6 m) high pressure hose and wand
Single Axle Transport System
- hydraulically controlled transport axles
- single lever control from operator’s platform
- wheels fold up during paving
- heavy duty towing hitch for travel removes for paving
Emergency Shut-Down System
- single switch operation
- electronic over hydraulic
- controls all critical functions of machine: travel, tamper, vibration
Operator’s Platform
- hydraulic system pressure gauges: travel, vibrator, tamper, auger
- hydraulic controls: travel, vibrator, tamper, pressure wash, strike-off, auger
- high visibility “wrap around” console
- engine controls and monitoring devices mounted on console
- safety railing
- engineered for easy monitoring of all machine functions
- canopy
*Engine make determined by customer need and availability
Optional Equipment
(not included in base machine)
Additional Hydraulic Vibrators
Curb Molds Built to Customer Specification
Hydraulic Center Bar Inserters with Electronic Indicator
- for insertion of straight bars into longitudinal joint
Hydraulic Oscillating Rear Belt Finisher with Variable Speed Control
- 14-inch (35 cm) wide rubber belt
- adjustable winch tensioner
Hydraulic Curb Shut-Off for Curb Molds
Front Delivery Belt
Power Back-up Wheels
Water Fogging Bar (for Watering Burlap)
- high pressure
- brass fogging nozzles
Additional 4 Port Vibrator Manifold
(when purchased with new machine)
- includes all vibrator quick disconnects
- includes 4 individual vibrator speed controls
- includes all hydraulic hoses
- factory installation
- includes additional vibrator pump capacity
Additional 8 Port Vibrator Manifold
(when purchased with new machine)
- includes all vibrator quick disconnects
- includes 8 individual vibrator speed controls
- includes all hydraulic hoses
- factory installation
- includes additional vibrator pump capacity
Additional Complete Frame Extension Assemblies
- 4 ft. (1.2 m) assembly
- includes frame sections, paving pans, tamper, auger, walkway
- does not include vibrators
Critical Spare Parts Package
2 Year Filter Package
Material and Specifications subject to change without notification